Dental Stool Sirona S Seat Upholstery Attachment Snap Fasteners
Product number:
DKL210050
slide 3 of 2
slide 1 to 2 of 2
Dental Stool Sirona S Seat Upholstery Attachment Snap Fasteners
Product number:
DKL210050
€3.10*
Item Description
Sirona S Dental Stool Seat Cushion Attachment Snap Fasteners
Additional product recommendations
- Perfectly fitting dental stool seat cushion attachment snap fasteners for secure attachment of the seat cushion to your Sirona S dental stool.
- Four snap fasteners are required per seat cushion.
- Same type and function as original parts (Manufacturer number 2936524).
- Colour of the snap fasteners: black (original in white and black, not relevant as it's in a non-visible area).
- Easy and quick replacement thanks to precise fit. Please refer to the following instructions.
Instructions for replacing the seat cushion on Sirona S dental stools
- The seat cushion is attached using four snap fasteners, which are screwed onto the rotating plate of the seat. The cushion is pressed onto these fasteners so that they lock into the four round openings of the seat base.
- To remove the cushion, place both hands to the left and right of the vertical seam in the gap between the cushion and the bottom cover. Pull the cushion upwards with a strong jerk. Important: Do not apply pressure to the dark brown or gray frame, as this may cause damage!
- Removing the seat cushion requires effort and is not easy. Often, the cushion is so tightly seated that the entire stool lifts when attempting to remove it! Stabilize the stool by pressing your foot on the frame near the castors or get assistance from a second person.
- ATTENTION: The black or white snap fasteners usually break when removing the old cushion – this is normal. Order new snap fasteners in our shop under article number DKL210050.
- After removing the cushion, check the condition of the existing fasteners. Remove any remnants of broken fasteners and screw the new snap fasteners into the designated threads on the seat plate.
- Position the new cushion exactly over the snap fasteners. The artificial leather cover has a seam that runs to the underside of the seat plate. This aligns with one of the snap fastener openings. Use the seam to pre-position and align the cushion correctly. By applying even pressure, the fasteners will snap into place and securely hold the cushion.
- We wish you great success in replacing your seat cushion and are happy to assist with any questions!
Additional product recommendations
- The matching upholstery set Art. 002052 (seat and back cushions).
- Is the gas pressure spring of your Sirona S dental stool no longer functioning as usual? You'll find it under Art. 002077V2.
- Do you also need matching new chair castors for your dental stool? Castors for Sirona S dental stool: Art. DKL250012.
- Do you still need the right cleaning and care products for your new cushions? Here is our care product range.
